The battery for Pocketbook Pro 903
In order to be sure that exactly this battery is installed in your e-book it is necessary to disassemble your device before ordering something. Some manufacturers of e-books install different batteries into different batches of the same model!
Attention: the authors are not responsible for disruptions of work of e-books got after using this information. Everything you do is on your risk! Using this method removes your e-book from the warranty!
In e-books Pocketbook Pro 903 is installed the battery PocketBookPro.
Parameters of the battery:
- model: PocketBookPro
- capacity: 1530 mAh
- length: 69 mm
- width: 48 mm
- thickness: 5.0 mm
It is necessary to disassemble an e-book taken off its back cover in order to replace the battery of Pocketbook Pro 903. Look at the materials lower in order to learn how to do that. Try not to damage plastic case and cover. Use a special instrument or a plastic card to detach the latches. Using a screwdriver in this case is unacceptable. After taking off the back cover you need to unscrew the screws fixing the battery take it off, exchange it for a new battery, screw the screws back and assemble the e-book. Then check its operability in the reading mode and charging mode.
You can order a new battery in the internet-shop using this link:
You can see the step by step instruction for disassembling of the e-book on the site youtube.com using this link: