Screen for the Barnes and Noble NOOK GlowLight 3
Remember that changing a screen of an electronic book is quite a hard work and if you are not sure in your abilities, it is better to go to the service centre. The authors are not responsible for your actions while following the recomendations written in this page.
In order to make sure that exactly this model of the screen is installed in your e-book it is necessary to disassemble your device before buying the screen. Some manufacturers of e-books install different displays into different batches of the same model!
On the flat cable of the display there are pasted some paper labels. There is given the voltage VCON as 3 numbers with a dot after the first number, which is needed for the image correction, on one of them. While on the other label which is bigger there is the model of the screen.
In e-books Barnes and Noble NOOK GlowLight 3 the most often installed screen is нет данных, made by ()
Characteristics of the screen:
- Model of the screen: нет данных
- Type of the screen: VIZPLEX
- Diagonal, inches: 5
- Size of the working area of the screen: 76x102 mm.
- Resolution: 600 x 800 dots
- Contrast: 7:1
- Density: 200 points per inch (ppi)
- Backlight of the screen: no
- sensor: no
Many people can think it is strange that the e-book is sensor but the display is not. The matter is that the sensor type of Barnes and Noble NOOK GlowLight 3 is infrared. Such a sensor is a separate product - frame with optical sensors. It is installed along the perimeter of the screen. It is important to install it exactly into the old place while you are assembling the device.
In order to install the display нет данных to the e-book Barnes and Noble NOOK GlowLight 3, to see the appearance and location of the label with a marking on the display and to determine the necessarity of next regulation of the e-book you can use our universal method:Next