Screen for the Digma R656
Remember that changing a screen of an electronic book is quite a hard work and if you are not sure in your abilities, it is better to go to the service centre. The authors are not responsible for your actions while following the recomendations written in this page.
In order to make sure that exactly this model of the screen is installed in your e-book it is necessary to disassemble your device before buying the screen. Some manufacturers of e-books install different displays into different batches of the same model!
On the flat cable of the display there are pasted some paper labels. There is given the voltage VCON as 3 numbers with a dot after the first number, which is needed for the image correction, on one of them. While on the other label which is bigger there is the model of the screen.
Characteristics of the screen:
- Model of the screen: нет данных
- Type of the screen: VIZPLEX
- Diagonal, inches: 5
- Size of the working area of the screen: 76x102 mm.
- Resolution: 600 x 800 dots
- Contrast: 7:1
- Density: 200 points per inch (ppi)
- Backlight of the screen: no
- sensor: no
As the display нет данных is made with a sensor but the e-book Digma R656 does not have such a function, the flat cable of the sensor (which was not in the old screen) should be cut away before the installation of the display into the device. The functions of the flat cables can be seen here. It is likely to check the operability of the screen before it in order to have an opportunity to return it to the seller in case of a malfunction. You should hook up the display to the disassembled e-book and turn on the device for it. It looks like something of the kind этом. The model is different but the algorithm is the same.In order to install the display нет данных to the e-book Digma R656, to see the appearance and location of the label with a marking on the display and to determine the necessarity of next regulation of the e-book you can use our universal method: